If you’re unfamiliar with the structure and constituents of a diamond, you can be misled to believe that a gemstone is a diamond when it’s actually cubic zirconia or moissanite. As a result, knowing how to recognize a fake diamond is vital. Despite the fact that this guide is instructive and practical, no one at-home test should be considered definitive. A diamond specialist has the necessary skills and technology to determine if a diamond is genuine or not.
When you buy a baguette diamond ring, you might get doubts about whether the diamond is authentic or not. Let’s take a look at the different ways in which a person can tell whether the baguette cut diamond ring they have is real or not.
Water Test
Use this simple technique to determine whether or not a diamond is genuine. Fill a regular-sized drinking glass with water to 34 % of its capacity. Place the ring in the glass with caution. It is a real diamond if the stone is sinking to the bottom. You’ve got a fake diamond if it floats on top of the water. The water test determines if your stone has the same density as a real diamond.
Check The Setting
Examine the type of setting and mount used if a stone has already been set in a ring. Due to the exorbitant cost of a diamond, it will only be put in high-end jewelry. An authentic diamond, for example, would be set in platinum, white gold, yellow gold, or pave setting, and the halo setting rings.
Fog Test
Place the ring between your two fingers and blow a puff of air on it to perform the fog test. The heat and humidity in your breath will produce a light fog to build on the diamond. If the fog clears off quickly, the diamond is genuine. It’s probably a fake diamond if the fog takes several seconds to clear. Diamonds efficiently transfer heat and dissipate it quickly.
Try Heating The Stone
Diamonds are constructed of an extremely robust substance that is unaffected by high temperatures. Take a small glass jar and fill it halfway with cold water to see if a diamond is fake or not. To keep the stone in place, use fireproof gloves or you can use plyers. Heat the stone for about 40 seconds with a lighter before dropping it into cold water. The stone is not an authentic diamond if it shatters. There will be no reaction from a genuine diamond.
